Free Shipping!!! On any order to contiguous USA!

Micro-Seal w/ Graffiti Control Water Repellent / Anti-Graffiti Micro-Seal w/ Graffiti Control Water Repellent / Anti-Graffiti

Micro-Seal w/ Graffiti Control Water Repellent / Anti-Graffiti

$99.98

MICRO-SEAL® with Graffiti Control is a hybrid water repellent and anti-graffiti solution. The formula penetrates deep to seal vertical porous substrates and create a non-sacrificial anti-graffiti barrier. After two coats are applied and coating has cured, graffiti can be easily removed with VANDLCLEAN SUPER.

View Technical Documents - Bottom of Page 

Highlights

  • Hybrid water repellent / anti-graffiti solution
  • Works on vertical and horizontal porous surfaces
  • Inhibits mold and mildew growth
  • Sustains repeated graffiti removals
  • Natural finish will not yellow over time
  • V.O.C. compliant
  • No silicone oils, paraffin wax, or urethanes

Micro-Seal® with Graffiti Control provides Professional grade, heavy-duty graffiti and water repellent performance on a wide variety of vertical surfaces including:

  • Bare Wood
  • Brick
  • Concrete
  • EFIS or Cement Plaster
  • Masonry Block
  • Stucco
  • Porous Stone
  • Unglazed Tile

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon
Wood 160-210
CMU Precision Block 70-80
CMU Split Face 60-80
CMU Scored / Fluted 75-90
CMU Lightweight 50-65
Clay Brick 135-160
Stucco 110-160
Dense Masonry Surfaces 135-160
Clay Block 60-70
EFIS 90-130

 

How to Use

1) Prepare Surface

Before product is applied, surface must be clean and dry.

2) Apply Product

VERTICAL SURFACE: Spray product beginning at top of surface working downward in vertical sections. Allow solution to maintain a 6-8 inch rundown from contact point. Once the first coat sits for approx. 5 minutes, repeat the process for a second coat.

HORIZONTAL SURFACE: Spray product in a cross hatch pattern letting it puddle slightly. Once the first coat sits for approx. 5 minutes, repeat the process for a second coat.

Roll or brush runs, drips, or puddles immediately to disperse material to ensure an even finish.

3) Let Dry

Full chemical cure takes 7 days.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT)