Free Shipping!!! On any order to contiguous USA!

VandlGuard Super Graffiti Remover Spray VandlGuard Super Graffiti Remover Spray

VandlGuard Super Graffiti Remover Spray

$38.48

VandlClean™ Super graffiti cleaner is an environmentally friendly, biodegradable graffiti remover designed to dissolve spray paint, marker, pen and pencil ink. VandlClean™ is a concentrated citrus based cleaner and degreaser designed for a wide range of cleaning chores on any surface not affected by water alone.

View Technical Documents - Bottom of Page 

Highlights

  • Biodegradable graffiti remover designed to dissolve spray paint, marker, pen or pencil ink
  • Citrus based cleaner works on a wide range of cleaning chores
  • Can be used to remove graffiti from brick, cement, wood and other porous surfaces
  • Works in conjunction with VandlGuard™ anti-graffiti coatings
  • Low Carbon Footprint – Low VOC, low odor, citrus based, and non-toxic

Coverage Rates (Theoretical)

Coverage of the remover will vary depending on how heavily the graffiti is painted on the surface. Multiple applications may be required to completely remove graffiti. Allowing the product to remain in place long enough will maximize the coverage of the remover.

How to Use

Non-Porous and Metallic Surfaces

Spray VandlClean SUPER directly on the affected surface. Let sit until graffiti begins to dissolve (1 to 2 minutes). Wipe the surface clean and rinse surface with water.

Painted Surfaces

Apply VandlClean SUPER in small sections to prevent damage to painted surface. Let sit until graffiti begins to dissolve (1 to 2 minutes). Wipe the surface clean with a clean rag. Always wash the surface with water to neutralize the graffiti cleaner when the job is completed. If VandlClean SUPER dissolves the underlying paint when applied, immediately neutralize the cleaned area with water.

Porous Brick or Concrete Surfaces

Apply VandlClean SUPER liberally. With a stiff brush, work the product into the surface using a twisting motion. Allow the product to seep into the surface for a minimum of 20-30 minutes before checking if the graffiti is dissolving. Once graffiti has dissolved, use a pressure washer to rinse the graffiti from the surface. If a pressure washer is not available, scrub the treated surface with warm water and an industrial-grade de-greaser or soap. Rinse with fresh water when finished. If all graffiti is not removed in the first attempt, perform a second application when dry.

Sandstone

Apply VandlClean SUPER liberally. With a stiff brush, work the product into the surface using a twisting motion. Allow the product to seep into the surface for a minimum of 20-30 minutes before checking if the graffiti is dissolving. Once graffiti has dissolved, scrub the treated surface with warm water and an industrial-grade de-greaser or soap. Rinse with fresh water when finished. If all graffiti is not removed in the first attempt, perform a second application when dry. WARNING: Do not use high-pressure water as it will damage sandstone as it is extremely soft.


 

Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET