BLOK-LOK™ with Graffiti Control is a hybrid water repellent and anti-graffiti solution. The formula penetrates deep to seals vertical porous substrates and create a non-sacrificial anti-graffiti barrier. After two coats are applied, graffiti can be easily removed with VANDLCLEAN SUPER.
View Technical Documents - Bottom of Page
Highlights
- Hybrid water repellent / anti-graffiti solution
- Works on vertical porous surfaces
- Inhibits mold and mildew growth
- Sustains repeated graffiti removals
- Natural finish will not yellow over time
- V.O.C. compliant
- No silicone oils, paraffin wax, or urethanes
Blok-Lok™ with Graffiti Control provides Professional grade, heavy-duty graffiti and water repellent performance on a wide variety of vertical surfaces including:
- Bare Wood
- Brick
- Concrete
- EFIS or Cement Plaster
- Masonry Block
- Stucco
- Porous Stone
- Unglazed Tile
Average Coverage Rate
100 sq. ft / gallon (two coats recommended)
How to Use
1) Prepare Surface
Before product is applied, surface must be clean and dry.
2) Apply Product
Spray solution beginning at top of surface working downward in vertical sections. Allow solution to maintain a 6-8 inch rundown from contact point. Once the first coat dries, repeat the process for a second coat.
3) Let Dry
Wait until surface is dry to the touch (60 minutes) between coats. Full chemical cure takes 7 days.
Technical Documents
TECHNICAL DATA SHEET | SAFETY DATA SHEET | ARCHITECTURAL SPECS
WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT)
