Satin-Lok ™is a modified silicone acrylic sealer that enhances and rejuvenates the surface color and enhances with a high gloss “Wet look”. Satin-Lok ™ offers a tough, durable protection that is both water repellent and wear resistant. Satin-Lok™ performs in a wide range of residential and commercial markets, and can be applied to both unpainted and painted concrete, masonry, wood interior/exterior and horizontal/vertical surfaces. Examples include porches, patios, decks, walkways, stone pavers, fences, and retaining walls.
View Technical Documents - Bottom of Page
Highlights
Protects, seals and beautifies surfaces with High Gloss “Wet look” clear acrylic finish
For use on concrete, masonry and wood interior/exterior and horizontal/vertical surfaces
Tough, durable, water repellent sealer that resists flaking with excellent adhesion
Non-yellowing, resists damage from UV rays for superior outdoor performance
Breathable – does not trap interior building moisture
Alkali resistant, can be applied on new concrete as soon as forms are removed
Low Carbon Footprint – low VOC, low odor, water based, non-toxic, no cancer causing formula
Coverage Rates (Theoretical)
Substrate
Sq Ft / Gallon
Dense Masonry
100-150
Porous Masonry
60-100
Stucco/EFIS
150-200
Wood
175-200
Painted Surfaces
400
How to Use
1) Prepare Surface
To apply, surface moisture content must be less than 25% as measured with an electronic moisture meter. Surfaces must be free of dirt, grime, efflorescence, lime run, construction debris, form oils and release agents, chalked materials, loose and peeling paint, mold, mildew, etc. All cracks should be pointed or caulked. Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.
2) Apply Satin-Lok ™
Horizontal Surfaces:Apply even coat w/ airless or pump sprayer. If pooling occurs, disperse for an even finish. Vertical Surfaces:Apply in a cross-hatch pattern using an airless or pump sprayer. Back-rolling may be required on very smooth surfaces to even any dripping. Multiple coats may be applied to increase the product’s gloss level. Ensure that the surface is dry to the touch before applying additional coats.
3) Let Dry
Let surface dry 60 minutes before opening to foot traffic. Full chemical cure takes 3-4 days.
