VandlGuard® Five Anti-Graffiti Coating is part of a two step non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. When used in conjunction with VandlGuard® Finish, the coating can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® Five is eligible for a 5 year material & labor warranty (see TDS for details).
View Technical Documents - Bottom of Page
Highlights
- Sustains repeated graffiti removals for 5 years
- Does not alter surface appearance or yellow over time
- Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
- Easy application – no mixing required
- Inhibits mildew, mold, fungus, & bacteria growth
- Time efficient – can be applied in one day
Coverage Rates (Theoretical)
| Substrate |
Sq Ft / Gallon |
| Block |
180-200 |
| Stucco |
200-250 |
| Brick |
250 |
| Wood & Tile |
200 |
| Concrete |
225-250 |
| Exposed Aggregate & EFIS |
225 |
| Metal & Painted Surfaces |
300 |
|
How to Use
1) Prepare Surface
To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.
Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.
PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard®FIVE.
3) Apply VandlGuard® Five
Apply VandlGuard®FIVE with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, let dry for 1-2 hours before applying VandlGuard® Finish Coat.
4) Apply VandlGuard® Finish Coat
Apply VandlGuard® Finish Coat with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, let dry for 1-2 hours before applying additional coats. Entire system fully cures in 3-4 days.
Graffiti Removal
Prior to graffiti removal, graffiti coating must cure for 3-4 days depending on weather conditions. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.
Technical Documents
TECHNICAL DATA SHEET | SAFETY DATA SHEET | ARCHITECTURAL SPECIFICATIONS | LARR APPROVAL REPORT | FIELD INSPECTION REPORT | LEED CREDITS
WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT)
