Free Shipping!!! On any order to contiguous USA!

VandlGuard IsoFree Aliphatic 2K White Base Gloss Finish

VandlGuard IsoFree Aliphatic 2K White Base Gloss Finish

$249.98

VandlGuard® IsoFree™ Aliphatic Urethane 2K is the first isocyanate free two-component, high performance, zero-VOC, odorless, water-based, aliphatic polyurethane paint/coating. VandlGuard® IsoFree™ Aliphatic Urethane 2K provides years of excellent protection against harsh weather conditions, UV exposure, corrosion, and graffiti.

What is IsoFree™ technology?

When Part B is mixed with Part A the crosslink reaction makes the combined product free of any isocyanates. Thereby the product is safe to apply for both the applicator and the environment.

Highlights

  • Non-yellowing topcoat, great for UV resistant applications
  • Direct-to-metal* and concrete applications
  • Use for graffiti protection applications
  • Chemical and acid resistant applications

*Do not use on bare ferrous metal. Only apply to ferrous metal that is properly prepped and primed to receive a water based coating.

Coverage Rates (Theoretical)

Substrate Sq Ft / Gallon
Textured Surfaces 250 – 300
All Masonry Surfaces 300
Painted Surfaces 400
Wood Surfaces 300
 Metal 400

How to Use*

*SEE TECHNICAL DATA SHEET BELOW FOR MIXING INSTRUCTIONS BEFORE APPLICATION

SMOOTH SURFACES

VandlGuard® IsoFree™ Aliphatic Urethane 2K may be applied directly over most surfaces without primer. Apply a light coat at a thickness of 3 to 4 wet mils. Do not exceed 5 mils. Reduction may create optimal flow. Dry mils thickness is 1.5-2.

POROUS SURFACES

Most porous surfaces should have a sealer or filler to adequately eliminate potential pinholes prior to applying VandlGuard® IsoFree™ Aliphatic Urethane 2K.

1. Apply two coats of VandlGuard® IsoFree™ Aliphatic Urethane 2K (3 – 4 mils wet per coat) allowing 4 hours between coats or when coating is tack free.

2. Any runs should be brushed or rolled out immediately before drying.

3. When dry, thickness is 1.5-2 mils

IMPORTANT: Proper methods to protect from over spraying should be implemented. Atomized particles will adhere to most surfaces and are extremely difficult to remove. Temperature and humidity directly affect pot life and dry time. Conditions should be between 40 – 95 °F (5 – 35 °C) and humidity should not exceed 80%.

Graffiti Removal

Prior to graffiti removal, graffiti coating must be fully cured. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


Technical Documents

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET – PART A | SAFETY DATA SHEET – PART B | ARCHITECTURAL SPECS WARRANTY PRE-REGISTRATION (DIGITAL) | WARRANTY PRE-REGISTRATION (TO PRINT)