Free Shipping!!! On any order to contiguous USA!

VandlGuard Single-Part Urethane Clear Matte Finish VandlGuard Single-Part Urethane Clear Matte Finish

VandlGuard Single-Part Urethane Clear Matte Finish

$199.98

VandlGuard® Single-Part Urethane is a water-based, Anti-Graffiti coating. Its strong clear film protects any exterior surfaces from graffiti and environmental damage. For applications that require a faster cure time, use the VandlGuard® Two-Part Urethane Kit, which also increases physical and chemical resistance. VandlGuard® Single-Part Urethane is eligible for up to 10 years of material & labor warranty.

View Technical Documents - Bottom of Page 

Highlights

  • Clean off graffiti as soon as 48 hrs after initial application
  • Sustains repeated graffiti removals for up to 10 years
  • Dries with a clear low gloss finish that will not yellow
  • Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
  • Easy application – Apply with a sprayer, brush, or roller
  • Single component – no mixing required
  • Inhibits mildew, mold, fungus, & bacteria growth
  • Time efficient – entire “System” can be completed in one day

Coverage Rates (Theoretical)

Surface Type Sq Ft / Gallon
Smooth 400
Rough/Porous 275-300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard® Single-Part Urethane.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Stir Product

Stir well for 5-10 minutes.

3) Apply Product

Apply VandlGuard® Single-Part Urethane with an airless sprayer, brush, or roller. If using an airless sprayer, cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 4 hours before applying additional coats. Product fully cures in 5-7 days.

4) Remove Graffiti

Within two days of graffiti incident, markings can be removed with a power wash. If more than 2 days have passed since the incident, VandlClean Super may be required. Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.


 

Technical Documents

VandlGuard® Single-Part Urethane

TECHNICAL DATA SHEET  |  SAFETY DATA SHEET  |  ARCHITECTURAL SPECIFICATIONS

General

LARR APPROVAL REPORT  |  FIELD INSPECTION REPORT  |  LEED CREDITS

WARRANTY PRE-REGISTRATION (DIGITAL)  |  WARRANTY PRE-REGISTRATION (TO PRINT)