VandlGuard® Anti-Graffiti Coatingis a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. VandlGuard® can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® is eligible for a material warranty of up to 10 years.
View Technical Documents - Bottom of Page
Sustains repeated graffiti removals for up to 10 years
Does not alter surface appearance or yellow over time
To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.
PLEASE NOTE: If surface is not sealed or painted, applyMicro-Seal®before using VandlGuard®.
Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.
2) Dilute (If Concentrate)
Mix 0.75 gallons of water with 32oz of product (1:3 Mix Ratio)
3) Apply Product
Apply VandlGuard® with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.