VandlGuard Zero Gloss Non-Sacrificial-Material Warranty

$55.98

VandlGuard® Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. VandlGuard® can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® is eligible for a material warranty of up to 10 years.

View Technical Documents - Bottom of Page

Highlights

Sustains repeated graffiti removals for up to 10 years
Does not alter surface appearance or yellow over time
Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
Easy application – no mixing required
Inhibits mildew, mold, fungus, & bacteria growth
Time efficient – can be applied in one day

Coverage Rates (Theoretical)

Substrate	Sq Ft / Gallon
Block	180-200
Stucco	200-250
Brick	250
Wood & Tile	200
Concrete	225-250
Exposed Aggregate & EFIS	225
Metal & Painted Surfaces	300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

PLEASE NOTE: If surface is not sealed or painted, apply Micro-Seal® before using VandlGuard®.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%.

2) Dilute (If Concentrate)

Mix 0.75 gallons of water with 32oz of product (1:3 Mix Ratio)

3) Apply Product

Apply VandlGuard® with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.

Technical Documents