VandlGuard Zero Gloss One-Material & Labor Warranty

$55.98

VandlGuard® One Anti-Graffiti Coating is a non-sacrificial anti-graffiti coating that protects surfaces from permanent staining and damage caused by commercially available spray paints. The coating can be applied to any vertical or horizontal exterior surface and dries clear (will not yellow). VandlGuard® One is eligible for a 1 year material & labor warranty.

View Technical Documents - Bottom of Page

Highlights

Sustains repeated graffiti removals for 1 year
Does not alter surface appearance or yellow over time
Protects concrete, stucco, EIFS, brick, wood, metal, plastic & painted surfaces
Easy application – no mixing required
Inhibits mildew, mold, fungus, & bacteria growth
Time efficient – can be applied in one day

Coverage Rates (Theoretical)

Substrate	Sq Ft / Gallon
Block	180-200
Stucco	200-250
Brick	250
Wood & Tile	200
Concrete	225-250
Exposed Aggregate & EFIS	225
Metal & Painted Surfaces	300

How to Use

1) Prepare Surface

To apply, surfaces must be clean, dry, and structurally sound. Surface moisture content must be less than 15% as measured with an electronic moisture meter. Freshly painted and stuccoed surfaces must fully chemically cure before applying to prevent yellowing.

Do not apply if rain, snow, or temperatures below 40°F are expected within 48 hours. Do not apply if relative humidity is greater than 80%. If surface is not sealed or painted, apply Micro-Seal®before using VandlGuard® One.

3) Apply Product

Apply VandlGuard® One with airless spray equipment. Cover the surface in a fine mist using a cross-hatched pattern. When the entire surface is coated, immediately repeat the process. Let dry for 1-2 hours before applying additional coats. Product fully cures in 3-4 days.

4) Remove Graffiti

Spray VandlClean Super on affected area and allow to sit for several seconds. Follow up with a power wash. Repeat as necessary.